JRC JMA-3910-4 User Manual

7 – 35
7.5
7.5.3.9 Setting PRF
This function is used to change the repetition frequency to reduce mutual interference.
Procedures
1. Press the
SUB
MENU
key to open the SUB MENU.
2. Press the
9
key twice to open the INIT SETTING #2 menu.
3. Press the
4
key twice to select "SETTING OF PRF".
4. Press the
RANGE
or
RANGE
or
BRILL
key to select number. (0-39)
5. Press the
ENT
key to confirm the setting.
Exit
6. Press the
SUB
MENU
key.
Init setting #2
INIT SETTING #2
Press an item number key.
0. PREVIOUS MENU
1. BEARING ADJUSTMENT
2. RANGE ADJUSTMENT
3. TUNE ADJUSTMENT
4. SETTING OF PRF 0
5. PM ADJUSTMENT
6.
7. DIAGNOSTIC MENU
8. MAINTENANCE MENU
9. NEXT MENU
To close this menu, Press (SUB MENU) key.
Note
● By pushing the [BRILL] control the pulse repetition frequency is directly changed without opening the
SUB MENU.

JRC JMA-3910-4 Specifications

General

Brand	JRC
Model	JMA-3910-4
Category	Marine Radar
Language	English