3 – 57
3.4
3.4.3 Function Setting Items
See below for the menu structure of the function setting items.
Page 1
1. MODE (Select the name to be used)
2. PROCESS OFF PROC1 PROC2 PROC3
3. IR OFF IR1 IR2 IR3
4. AUTO STC/FTC OFF AUTO STC AUTO FTC
5. TGT EXPANSION OFF EXP1 EXP2 EXP3
6.
7.
8. SAVE PRESENT STATE
Page 2
1. PULSE WIDTH 0.75NM SP MP
2. PULSE WIDTH 1.5NM SP MP LP
3. PULSE WIDTH 3NM SP MP LP
4. PULSE WIDTH 6NM SP MP LP
5. PULSE WIDTH 12NM SP MP LP
6. PULSE WIDTH 16NM MP LP
Page 3
1. VIDEO LATITUDE NORMAL WIDE NARROW
2. VIDEO NOISE REJECTION OFF LEVEL1 LEVEL2
3. GAIN OFFSET ± NUMERIC VALUE
4. XMIT REPETITION FREQUENCY
NORMAL HIPOWER ECONOMY
5. SMALL BUOY DETECTION OFF ON
6. FISHING NET DETECTION OFF ON
7. AUTO DR CONT OFF ON
Page 4
1. RADAR TRAILS INTERVAL 1MIN 3MIN 6MIN 12MIN
15MIN 30MIN 60MIN CONT
2. RADAR TRAILS REF LEVEL LEVEL1 LEVEL2 LEVEL3 LEVEL4
3. RADAR TRAILS REDUCTION OFF LEVEL1 LEVEL2 LEVEL3
4. RADAR TRAILS PROCESS OFF ON
5. RADAR TRAILS SMOOTHING OFF ON
Page 5
1. PROCESS SWITCHING OFF ON
2. PROC SWITCH RANGE NUMERIC VALUE
3.
4.
5.
6. INITIALIZE
To Next Page
Loading...
Need help?
General
