7 – 27
7.5
7.5.3.3 Setting Own Ship Speed Equipment
This function is used to select the equipment for inputting the own ship course.
Procedures
1. Press the
SUB
MENU
key to open the SUB MENU.
2. Press the
9
key to open the INIT SETTING #1 menu.
3. Press the
2
key to select "SPEED EQUIPMENT".
4. Press the
2
key to select "MANUAL" or "LOG", "GPS" or "2-AXIS".
5. Press the
ENT
key to confirm the setting.
Exit
6. Press the
SUB
MENU
key.
Init setting #1
INIT SETTING #1
Press an item number key.
0. PREVIOUS MENU
1. COURSE EQUIPMENT
GYRO HDG SENSOR
2. SPEED EQUIPMENT MANUAL
LOG GPS 2AXIS
3. MANUAL SPEED xx. x KT
4. FUNCTION MENU
5. BUZZER VOLUME OFF LOW MIDDLE
HIGH
6. DRIFT SET x .x°
DRIFT x. x KT
7. GPS INITIALIZE MENU
8. SETTING DGPS / STATUS
9. NEXT MENU
To close this menu, Press (SUB MENU) key.