JRC JMR-5400 Series User Manual

6-25 Section 6 Settings
5
6
Radar mode
Save item
Preference to be saved
Default setting or
value after [Default display
configurations]
is clicked on
Location Item
Parallel index
lines
Radar screen
- Measuring tools - PI
(parallel index)
PI (parallel index)
• Display ON/OFF
• Control, measurement
base point (Empty/C/D
and floating position. C
is saved with the DC
coordinates, and D is
saved with the
coordinates.)
• Display ON/OFF: OFF
• Control right: ON
• Bearing value: 0°
• Interval: +0.00 NM
Display for All Lines: OFF
Mode: All
Operation Area: One Side
Floating: OFF
Heading Link: OFF
Reference Bearing: True
Display
mode of the
radar picture
Radar screen
- Range and mode
information
• Motion mode
• Direction mode
TM
N-UP
TM reset position
Stabilisation
Sea/Ground
Radar screen
- Range and mode
information
• Stabilisation mode
(combo box)
GND
Off-Centring
Radar screen
- Range and mode
information
• Off-Centring button →
Off-centring ON/OFF
state and off-centring
DC state
Off-Centring:
OFF (off-centring)
Target trails
Radar screen
- Target information
• Route True/Relative
• Route length
• Route True/Relative: True
• Route length: 6 min
Past
Positions
Radar screen
- Target information
• Past POSN OFF
Vector mode
Radar screen
- Target information
• Vector past position
True/Relative
Relative
Vector Time
Radar screen
- Target information
Vector length 6 min

JRC JMR-5400 Series Specifications

General

Brand	JRC
Model	JMR-5400 Series
Category	Marine Equipment
Language	English