3-40
Step Operation IME/DTE Response Remarks
24
• After confirmation of each
parameter, press
F1 (“Send Call”)
key.
• The contents of the
selected file are
displayed, and then
Main menu is
displayed again.
• Normally, it takes
about 3-5 minutes
to complete the
communication.
25
• “S&F message
(96-01-15 11:00) sent
to LES (203)” is
displayed.
• Example: Call date
and time:
1996/1/15
11:00
LES ID: 203
• When the “Message
print on function” is
turned on, the call
time, date destination
number, LES ID, and
the message are
printed out.
• Press
F10
(“Previous”) key to
delete the message.
26
• After the message is transmitted to
subscribers, “S&F message
delivered to subscribers” is
displayed. Press
F10 (“Previous”)
key to return to main menu.
• “S&F message
(96-01-15 11:00)
delivered to
subscribers
(07202822351)” is
displayed.
• Example: Delivery
date and time:
1996/1/15
11:00
Destination number:
07202822351
• Press
F10
(“Previous”) key to
delete the message.
Note 1) Message can be sent to up to 5 subscribers whom destination code is same, by moving the
cursor to “Destination code-subscriber’s number, and answerback code” with pressing
Enter key (Multi address function).
When the subscriber’s number set to two numbers or more, “*” is displayed at right side of
the number.
Note 2) When the entered file is not in the IME/DTE memory or the USB drive, the following
window is displayed, press
F10 (“Previous”) key and type the new file name.
Fig.3.8.1b “ERROR” Window
ERROR
The file is missing.
Confirm the file name.
F10:Previous
To Next Page
Loading...
