JRC jue-87 - Page 99

3-39
3
Step Operation IME/DTE Response Remarks
12
• Press
F10 (“Previous”) key to
return the “Telex” window.
• The “Telex” window
is displayed and the
cursor is moved to
“land Earth station
(les)”.
13
• When the LES is selected, press
Enter key.
• The cursor is moved
to right side.
• When the LES ID is
knowledge, type the
LES ID directly.
14
• Confirm the contents and press
F2
(“LES list”) key.
• The “Les list”
window is displayed.
• When the JUE-87 is
not synchronized to
satellite, the blank
list is displayed.
15
• Select the Les ID by
↑, ↓ key, and
press Enter key.
• The cursor is moved
to “posItion”.
• Note 3
16
• When the setting of the “posItion”
is changed, press
Enter key.
• The cursor is moved
to right side.
17
• When the ship’s position is included
the transmitting message, select
“oN” and press
Enter key. When
the ship’s position is not included,
select “Off” and press
Enter key.
• The cursor is moved
to “delivery
Confirmation”.
18
• When the setting of the “delivery
Confirmation” is changed, press
Enter key.
• The cursor is moved
to right side.
19
• When the delivery confirmation is
requested to LES, select “oN” and
press
Enter key.
• When the delivery confirmation is
not requested to LES, select “Off”
and press
Enter key.
• The cursor is moved
to “characTer code”.
20
• When the setting of the “characTer
code” is changed, press
Enter key.
• The cursor is moved
to right side.
21
• Select the “characTer code” and
Enter key.
• Select the “Ia5” normally.
• The cursor is moved
“Priority”.
22
• When the “Priority” is changed,
press
Enter key.
• The cursor is moved
to right side.
23
• When the priority is set to the
normal, select “Routine” and press
Enter key.
• When the priority is set to the
distress, select “Distress” and press
Enter key.
• The cursor is returned
to ”Destination
code-subscriber’s
number and
answerback”.