JRC jue-87 - Page 113

3-53
3
Step Operation IME/DTE Response Remarks
1
• Move the cursor to
“Transmit” and press
Enter key.
• The “Transmit” window is
displayed.
2
• Move the cursor to the
“data (psTn)” and press
Enter key.
• The “Data (PSTN)”
window is displayed.
• “Data (PSTN)” is
optional facility for
each LES.
3
• Move the cursor to the
“Country
code-subscriber’s
number” and press
Enter.
• The “Destination” window
is displayed.
4
• Move the cursor to the “1:”
and press
Enter key.
• The cursor is moved to
“Subscriber’s no”.
• When the abbreviated
number is used, press
F2 (“Address book
code”) key.
5
• Type telephone country
code, subscriber’s number
and press
Enter.
• Ex. Country code: 081
Subscriber’s number:
12345678
•
0 8 1 1 2 3 4 5 6 7 8
Enter
• The cursor is moved to
“2:”.
• Note 1
6
• After confirmation of each
parameter, press
F10
(“Previous”) key.
• The “Data (PSTN)”
window is displayed.
• The cursor is moved to
“Modem of subscriber”.
7
• When the setting of the
Modem of subscriber’s is
changed, press
Enter key.
• The cursor is moved to
right side.
8
• Select the setting of the
Modem of subscriber’s and
press
Enter key.
V22 : 1200bps
V22bis : 2400bps
V32bis : 9600bps
Others : 3 digits protocol
number described the
ITU-T
• The “Data (PSTN)”
window is displayed.
• The cursor is moved to
“File name”.
9
• When the file is selected,
press
Enter key.
• The cursor is moved to
right side.
10
• Press
F2 (“File selection”)
key.
• The “File list” window is
displayed.