JRC jue-87 - Page 114

3-54
Step Operation IME/DTE Response Remarks
11
• Select the file by
↑ , ↓.key
and press Enter key.
• The contents of the file are
displayed.
• When the file name is
knowledge, type the
file name directly.
• Note 2, 3
12
• After confirmation of the
contents and press
F10
(“Previous”) key.
• The “File list” window is
displayed.
13
• Press
F10 (“Previous”) key
to return the “Data
(PSTN)” window.
• The “Data (PSTN)” window
is displayed.
• The cursor is moved to
“land Earth station (les)”.
14
• When the LES is selected,
press
Enter key.
• The cursor is moved to right
side.
• When the LES ID is
knowledge, type the
LES ID directly.
15
• Press
F10 (“LES list”) key.
• The “LES list” window is
displayed.
• When the JUE-87 is not
synchronized to
satellite, the blank list
is displayed.
16
• Select the LES ID by
↑ , ↓
key, and press Enter key.
• The “Data (PSTN)” window
is displayed.
• The cursor is moved to
“posItion”.
• Note 4
17
• When the setting of the
“posItion” is changed,
press
Enter key.
• The cursor is moved to right
side.
18
• When the ship’s position is
included the transmitting
message, select “oN” and
press
Enter key.
When the ship’s position is
not included, select “Off”
and press
Enter key.
• The cursor is moved to
“characTer code”.
19
• When the setting of the
“characTer code” is
changed, press
Enter key.
• The cursor is moved to right
side.
20
• Select the “characTer code”
and
Enter key.
• Select the “Ia5” normally.
• The cursor is moved to
“delivery Confirmation”.
21
• When the setting of the
“delivery Confirmation”
is changed, press
Enter key.
• The cursor is moved to right
side.