3-55
3
Step Operation IME/DTE Response Remarks
22
• When the delivery
confirmation is requested to
LES, select “oN” and press
Enter key.
• When the delivery
confirmation is not
requested to LES, select
“Off” and press
Enter key.
• The cursor is returned to
“country coDe-subscriber’s
number”.
23
• After confirmation of each
parameter, press
F1 (“Send
Call”) key.
• The contents of the selected
file are displayed, and then
Main menu is displayed
again.
• Normally, it takes about
3-5 minutes to
complete the
communication.
24
• “S&F message (96-01-15
11:00) sent to LES (203)”
is displayed.
Example: Call date and
time:
1996/1/15
11:00
LES ID: 203
• When the message print on
function is turned on, the
call time, date destination
number, LES IDs are
displayed.
• Press F10 (“Previous”)
key to clear the
message.
25
• “S&F message (96-01-15
11:00) delivered to
subscribers (0811234567)”
is displayed.
• Example: Delivery date and
time:
1996/1/15
11:00
Destination number:
0811234567
• When the message print on
function is turned on, the
call time destination
number and LES IDs are
displayed.
• Press F10 (“Previous”)
key to clear the
message.
Note 1) Message can be sent to up to five subscribers whom destination code is same, by moving the
cursor to “Destination code-subscriber’s number and answerback code” then pressing
Enter key. When the subscriber’s number set to 2 numbers or more, “*” is displayed at right
side of the number.
To Next Page
Loading...
