JRC jue-87 - Page 119

3-59
3
Step Operation IME/DTE Response Remarks
14
• When the setting of the
“posItion” is changed,
press
Enter key.
• The cursor is moved to
right column from
“posItion”.
15
• When the ship’s position is
included the transmitting
message, select “oN” and
press
Enter key.
• When the ship’s position is
not included, select “Off”
and press
Enter key.
• The cursor is moved to
“traNsfer”.
16
• When the setting of
“traNsfer” is changed,
press
Enter key.
• The cursor is moved to
right column from
“traNsfer”.
17
• When the data reporting
service is used, select the
“Data report” and press
Enter key.
• When the store and
forward service is used,
select the “S&F” and press
Enter key.
• When the “S&F” is
selected, the “closed
network” window is
displayed.
• When the “Data report”
is selected, skip to step
23.
18
• Select the “characTer
code” and
Enter key.
• The cursor is moved to
right column from
“characTer code”.
19
• When the setting of the
“characTer code” is
changed, press
Enter key.
• The cursor is moved to
“delivery
Confirmation”.
20
• When the setting of the
“delivery Confirmation” is
changed, press
Enter key.
• The cursor is moved to
right column from
“delivery
Confirmation”.
21
• When the delivery
Confirmation is requested
to LES, select “oN” and
press
Enter key.
• When the delivery
confirmation is not
requested to LES, select
“Off” and press
Enter key.
• The cursor is returned to
“closed network id”.
22
• After confirmation of each
parameter, press
F1 (“Send
Call”) key.
• The contents of the
selected file are
displayed, and then Main
menu is displayed again.
• Normally, it takes about
3-5 minutes to complete
the communication.