JRC jue-87 User Manual

3-62
Step Operation IME/DTE Response Remarks
9
• Press
F10 (“Previous”) key to
return to the “Special access
network” window.
• The cursor is moved to
“land Earth station
(les)”.
10
• When the LES is selected,
press
Enter key.
• The cursor is moved to
right column from
“land Earth station
(les)”. .
• When the LES ID is
knowledge, type the
LES ID directly.
11
• Press
F2 (“Les list”) key.
• The “Les list” window
is displayed.
• When the JUE-87 is
not synchronized to
satellite, the blank list
is displayed.
12
• Select the LES ID by
↑ , ↓
key, and press Enter key.
• The cursor is moved to
“posItion”.
• Note 3
13
• When the setting of the
“posItion” is changed, press
Enter key.
• The cursor is moved to
right column from
“posItion”.
14
• When the ship’s position is
included the transmitting
message, select “oN” and
press
Enter key.
• When the ship’s position is not
included, select “Off” and
press
Enter key.
• The cursor is moved to
“characTer code”.
15
• When the setting of the
“characTer code” is changed,
press
Enter key.
• The cursor is moved to
right column from
“characTer code”.
16
• Select the “characTer code”
and
Enter key.
• The cursor is moved to
“delivery
Confirmation”.
17
• When the setting of the
“delivery Confirmation” is
changed, press
Enter key.
• The cursor is moved to
right column from
“delivery
Confirmation”.
18
• When the delivery
confirmation is requested to
LES, select “oN” and press
Enter key.
• When the delivery
confirmation is not requested
to LES, select “Off” and press
Enter key.
• The cursor is moved to
“characTer code”.
• The “special access
code” window is
displayed.
19
• After confirmation of each
parameter, press
F1 (“Send
Call”) key.
• Normally, it takes
about 3-5 minutes to
complete the
communication.

JRC jue-87 Specifications

General

Brand	JRC
Model	jue-87
Category	Marine Equipment
Language	English