Juniper SRX Series

• 1-Port Clear Channel DS3/E3 GPIM Network Interface Specifications on page 24
• 1-Port Clear Channel DS3/E3 GPIM Supported Standards on page 80
• 1-Port Clear Channel DS3/E3 GPIM LEDs on page 79
• 1-Port Clear Channel DS3/E3 GPIM Components on page 76
• 1-Port Clear Channel DS3/E3 GPIM Supported Loopback Diagnostics on page 80
• 1-Port Clear Channel DS3/E3 GPIM Basic Configuration on page 221
1-Port Clear Channel DS3/E3 GPIM Hardware Specifications
The 1-Port Clear Channel DS3/E3 Gigabit-Backplane Physical Interface Module (GPIM)
has the hardware specifications listed in Table 43 on page 78.
Table 43: 1-Port Clear Channel DS3/E3 GPIM Hardware Specifications
ValueDescription
0.76 in. x 6.72 in. x 8.52 in.
(19.2 mm x 170.8 mm x 216.4 mm)
Dimensions (H x W x L)
1.11 lb (0.504 kg)Weight
DSX3 interface with dual female 75-ohm BNC
coaxial connectors (separate Tx/Rx)
Connector type
Single-high, single-wide GPIMForm factor
32°F through 104°F (0°C through 40°C)Environmental operating temperature
-40°F through 158°F (-40°C through 70°C)Storage temperature
5% to 90% noncondensingRelative humidity
Up to 10,000 ft (3,000 m)Altitude
Related
Documentation
1-Port Clear Channel DS3/E3 GPIM Overview on page 75•
• 1-Port Clear Channel DS3/E3 GPIM Network Interface Specifications on page 24
• 1-Port Clear Channel DS3/E3 GPIM Supported Standards on page 80
• 1-Port Clear Channel DS3/E3 GPIM Key Features on page 77
• 1-Port Clear Channel DS3/E3 GPIM LEDs on page 79
• 1-Port Clear Channel DS3/E3 GPIM Components on page 76
• 1-Port Clear Channel DS3/E3 GPIM Supported Loopback Diagnostics on page 80
• 1-Port Clear Channel DS3/E3 GPIM Basic Configuration on page 221
Copyright © 2015, Juniper Networks, Inc.78
SRX Series Services Gateways for the Branch Physical Interface Modules Reference