Juniper SRX Series

Table 93: EIA-449 DTE Cable Pinouts for the 8-Port Serial
GPIM (continued)
DescriptionPairingPair
Dir
Output
(O)
and
Input
(I)
DB-37 (2)
Pin
DB-37 (1)
Pin
VHDCI-68
Pin
Protocol Identifier_1T29 to T27
Protocol ModeT19 to T18
Related
Documentation
EIA-449 DCE Cable Pinouts for 8-Port Serial Gigabit-Backplane Physical Interface
Module on page 163
•
• EIA-530 DTE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface
Module on page 175
• EIA-530 DCE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface
Module on page 171
• EIA-530A DTE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface
Module on page 183
• EIA-530A DCE Cable Pinouts for 8-Port Serial Gigabit-Backplane Physical Interface
Module on page 179
• RS-232 DTE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface
Module on page 188
• RS-232 DCE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface
Module on page 186
• V.35 DTE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface
Module on page 194
• V.35 DCE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface
Module on page 190
• X.21 DTE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface
Module on page 199
• X.21 DCE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface
Module on page 197
EIA-530 DCE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface
Module
Table 94 on page 172 gives the EIA-530 DCE cable pinouts for the 8-Port Serial
Gigabit-Backplane Physical Interface Modules.
171Copyright © 2015, Juniper Networks, Inc.
Chapter 24: Serial Gigabit-Backplane Physical Interface Module Cable Specifications