Juniper SRX Series User Manual

CHAPTER 5
1-Port ADSL2+ Mini-Physical Interface
Module
•
1-Port ADSL2+ Mini-Physical Interface Module Overview on page 45
•
1-Port ADSL2+ Mini-Physical Interface Module Key Features on page 46
•
1-Port ADSL2+ Mini-Physical Interface Module Hardware Specifications on page 47
•
1-Port ADSL2+ Mini-Physical Interface Module LEDs on page 47
•
1-Port ADSL2+ Mini-Physical Interface Module Supported Standards on page 48
•
1-Port ADSL2+ Mini-Physical Interface Module Supported Loopback
Diagnostics on page 49
1-Port ADSL2+ Mini-Physical Interface Module Overview
The 1-Port ADSL2+ Mini-Physical Interface Module (Mini-PIM) provides a single physical
interface to asymmetric digital subscriber line (ADSL) network media types.
The following 1-Port ADSL2+ Mini-PIM cards are available:
•
Annex A
•
Annex B
NOTE: The ADSL2+ Annex A card also operates in Annex M mode.
Figure 8 on page 45 shows the front panel of ADSL2+ Annex A Mini-PIM.
Figure 8: ADSL2+ Annex A Mini-PIM Front Panel
g031134
Figure 9 on page 46 shows the front panel of ADSL2+ Annex B Mini-PIM.
45Copyright © 2015, Juniper Networks, Inc.

Juniper SRX Series Specifications

General

Category	Gateway
Operating System	Junos OS
Product Family	SRX Series
Purpose	Security
VPN Throughput	Varies greatly depending on the specific model, ranging from Gbps to Tbps
Power Supply	Varies depending on the specific model (e.g., AC, DC, Redundant)