Juniper SRX Series

• EIA-530 DTE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface
Module on page 175
• EIA-530 DCE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface
Module on page 171
• EIA-530A DTE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface
Module on page 183
• EIA-530A DCE Cable Pinouts for 8-Port Serial Gigabit-Backplane Physical Interface
Module on page 179
• RS-232 DTE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface
Module on page 188
• RS-232 DCE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface
Module on page 186
• V.35 DTE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface
Module on page 194
• V.35 DCE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface
Module on page 190
• X.21 DTE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface
Module on page 199
X.21 DTE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface
Module
Table 103 on page 199 gives the X.21 DTE cable pinouts for the 8-Port Serial
Gigabit-Backplane Physical Interface Modules.
Table 103: X.21 DTE Cable Pinouts for the 8-Port Serial GPIM
DescriptionPairingPairDir
DB-15 (2)
Pin
DB-15 (1)
Pin
VHDCI-68
Pin
Shield Ground1T37
Send Data (A)T14Pair 1O2T16
Request to Send
(A)
T48Pair 2O3T50
Receive Data
(A)
T39Pair 3I4T41
Clear to Send
(A)
T40Pair 4I5T42
Receive Timing
(A)
T36Pair 5I6T38
199Copyright © 2015, Juniper Networks, Inc.
Chapter 24: Serial Gigabit-Backplane Physical Interface Module Cable Specifications