•
8-Port Gigabit Ethernet SFP XPIM
•
16-Port Gigabit Ethernet XPIM
•
16-Port Gigabit Ethernet XPIM (with PoE)
•
24-Port Gigabit Ethernet XPIM
•
24-Port Gigabit Ethernet XPIM (with PoE)
Related
Documentation
SRX Series Services Gateway Mini-Physical Interface Modules Overview on page 7•
• SRX Series Services Gateway Gigabit-Backplane Physical Interface Modules Overview
on page 8
• SRX Series Services Gateway Interface Modules and Compatibility on page 11
SRX Series Services Gateway Mini-Physical Interface Modules Overview
A Mini-Physical Interface Module (Mini-PIM) is a network interface card (NIC) that is
installed on the SRX Series Services Gateway to provide physical connections to a LAN
or a WAN. The Mini-PIM receives incoming packets from the network and transmits
outgoing packets to the network.
Table 4 on page 7 lists the Mini-PIMs and their model numbers.
Table 4: SRX Series Services Gateway Mini-PIMs Model Numbers
Model NumbersMini-PIMs
SRX-MP-1SFP1-Port small form-factor pluggable (SFP)
Mini-PIM
SRX-MP-1SFP-GE1-Port Gigabit Ethernet small form-factor
pluggable (SFP)
SRX-MP-1ADSL2-A (Annex A)
SRX-MP-1ADSL2-B (Annex B)
ADSL2+ Mini-PIM
SRX-MP-1DOCSIS3DOCSIS Mini-PIM
SRX-MP-8GSHDSLG.SHDSL Mini-PIM
SRX-MP-1SerialSerial Mini-PIM
SRX-MP-1T1E1T1/E1 Mini-PIM
SRX-MP-1VDSL2-A (Annex A)VDSL2 Mini-PIM
The Mini-PIMs supported on the SRX Series Services Gateway are field-replaceable. You
can install a Mini-PIM in the Mini-PIM slot on the front panel of the services gateway
chassis.
7Copyright © 2015, Juniper Networks, Inc.
Chapter 1: SRX Series Services Gateway Interface Modules Support
To Next Page
Loading...
Need help?
General
