Juniper SRX Series

• 1-Port SFP Mini-Physical Interface Module Basic Configuration on page 208
1-Port ADSL2+ Mini-Physical Interface Module Network Interface Specifications
Table 15 on page 21 lists the 1-Port ADSL2+ Mini-Physical Interface Module (Mini-PIM)
network interface specifications.
Table 15: 1-Port ADSL2+ Mini-PIM Network Interface Specifications
ValuesSpecifications
ANNEX-A
•
Auto
•
ANSI-DMT(ANSI T1.413)
•
ITU-DMT(G.992.1)
•
ITU-DMT-BIS (G.992.3)
•
ADSL2+(G.992.5)
ANNEX-B
•
Auto
•
ITU-DMT(G.992.1)
•
ITU-DMT-BIS (G.992.3)
•
ADSL2+(G.992.5)
•
ITU-ANNEXB-UR2
ANNEX-M
•
ITU-DMT-BIS (G.992.3)
•
ADSL2+(G.992.5)
Supported operating modes
•
For ANSI DMT, 8 Mbps downstream and 896 Kbps upstream
•
For G.992.1, 8 Mbps downstream and 1.2 Mbps upstream
•
For G.992.3, 12 Mbps (Annex A) or 10 Mbps (Annex B)
downstream and 1.2 Mbps Upstream
•
For G.992.5, 24 Mbps downstream and 1.2 Mbps upstream
Supported maximum speed
•
CBR
•
VBR
•
RTVBR
Supported ATM QoS
•
ATM-PVC
•
Ethernet-over-ATM
Supported encapsulation
Related
Documentation
1-Port ADSL2+ Mini-Physical Interface Module Overview on page 45•
• 1-Port ADSL2+ Mini-Physical Interface Module Hardware Specifications on page 47
• MTU Default and Maximum Values for Physical Interface Modules on page 12
• 1-Port ADSL2+ Mini-Physical Interface Module Supported Standards on page 48
21Copyright © 2015, Juniper Networks, Inc.
Chapter 2: Network Interface Specifications