Juniper SRX Series

CHAPTER 20
ADSL2 + Mini-Physical Interface Module
•
RJ-11 Connector Pinouts for the 1-Port ADSL2+ Mini-Physical Interface
Module on page 133
RJ-11 Connector Pinouts for the 1-Port ADSL2+ Mini-Physical Interface Module
The 1-Port ADSL2+ Mini-Physical Interface Module (Mini-PIM) uses an RJ-11 cable, which
is not supplied with the Mini-PIM. Table 74 on page 133 gives the RJ-11 connector pinouts.
Table 74: RJ-11 Connector Pinouts for the 1-Port ADSL2+ Mini-PIM
SignalPin
No connect1
No connect2
RJ P-Tip3
RJ N-Ring4
No connect5
No connect6
Related
Documentation
• 1-Port ADSL2+ Mini-Physical Interface Module Overview on page 45
• 1-Port ADSL2+ Mini-Physical Interface Module Hardware Specifications on page 47
133Copyright © 2015, Juniper Networks, Inc.