Juniper SRX Series

1-Port Clear Channel DS3/E3 GPIM Supported Standards
The 1-Port Clear Channel DS3/E3 Gigabit-Backplane Physical Interface Module (GPIM)
supports the following standards:
•
DS3 mode standards:
•
ANSI TI.102, TI.107, T1.404
•
Telecordia GR 499-CORE, GR 253-CORE, GR 449-CORE
•
Telecordia TR-TSY-000009
•
AT&T Technical Reference 54014
•
E3 mode standards:
•
ITU G.751, G.823, G.703
•
Telecordia GR 499-CORE
Related
Documentation
1-Port Clear Channel DS3/E3 GPIM Overview on page 75•
• 1-Port Clear Channel DS3/E3 GPIM Hardware Specifications on page 78
• 1-Port Clear Channel DS3/E3 GPIM Network Interface Specifications on page 24
• 1-Port Clear Channel DS3/E3 GPIM Key Features on page 77
• 1-Port Clear Channel DS3/E3 GPIM LEDs on page 79
• 1-Port Clear Channel DS3/E3 GPIM Components on page 76
• 1-Port Clear Channel DS3/E3 GPIM Supported Loopback Diagnostics on page 80
• 1-Port Clear Channel DS3/E3 GPIM Basic Configuration on page 221
1-Port Clear Channel DS3/E3 GPIM Supported Loopback Diagnostics
The 1-Port Clear Channel DS3/E3 Gigabit-Backplane Physical Interface Module (GPIM)
has the following loopback diagnostics:
•
DS3 mode: local, remote, payload
•
E3 mode: local and remote
•
Test patterns (BERT):
•
All ones
•
All zeros
•
Alternating ones and zeros (AA/55)
•
PRBS 2^15-1 (as specified in ITU-T 0.151)
•
PRBS 2^20-1 (as specified in ITU-T 0.153)
Copyright © 2015, Juniper Networks, Inc.80
SRX Series Services Gateways for the Branch Physical Interface Modules Reference