Table 50: 8-Port Gigabit Ethernet SFP XPIM Physical
Specifications (continued)
ValueDescription
SFPConnector type
XPIMForm factor
32°F through 104°F (0°C through 40°C)Environmental operating temperature
5% to 90% noncondensingRelative humidity
Up to 10,000 ft (3000 m)Altitude
Related
Documentation
8-Port Gigabit Ethernet SFP XPIM Overview on page 91•
• 8-Port Gigabit Ethernet SFP XPIM Network Interface Specifications on page 25
• 8-Port Gigabit Ethernet SFP XPIM Supported Modules on page 95
• 8-Port Gigabit Ethernet SFP XPIM Key Features on page 93
• 8-Port Gigabit Ethernet SFP XPIM LEDs on page 94
• 8-Port Gigabit Ethernet SFP XPIM Components on page 92
• 8-Port Gigabit Ethernet SFP XPIM Basic Configuration on page 227
8-Port Gigabit Ethernet SFP XPIM LEDs
The 8-Port Gigabit Ethernet small form-factor pluggable XPIM (SFP XPIM) has two LEDs
for each port — LINK and ACT.Each XPIM has a STATUS LED, which indicates the status
of the XPIM.The LEDs are listed in Table 51 on page 94 . See “8-Port Gigabit Ethernet SFP
XPIM Overview” on page 91 for more information.
Table 51: 8-Port Gigabit Ethernet SFP XPIM LED States
DescriptionStateColorLED
Port is online.OnGreenLINK
Port is offline.Off
Port is receiving or sending data.BlinkingGreenACT
Port might be online but, is not receiving or
sending data.
Off
Copyright © 2015, Juniper Networks, Inc.94
SRX Series Services Gateways for the Branch Physical Interface Modules Reference
To Next Page
Loading...
Need help?
General
