•
SFPP-10GE-LRM
•
Copper Twin-AX 1m
•
Copper Twin-AX 3m
•
Copper Twin-AX 5m
•
Copper Twin-AX 7m
NOTE: The 2-Port 10-Gigabit Ethernet XPIM does not support 1GE SFP
transceivers.
•
Anti-counterfeit capabilities.
•
Quad speed support for copper mode: 10GBase-T IEEE 820.3an, 1000Base-T IEEE
802.3ab, 100Base-T IEEE 802.3u, and 10Base-T IEEE 802.3.
•
Standard quality of service (QoS) features.
•
User-configuration of fiber and copper ports:
•
When the interface is configured as a copper port, typical Ethernet configuration
such as autonegotiation is supported. Forced rate and link mode are allowed. Four
forced and autonegotiation rates are provided: 10 G and 1 G. Autonegotiation is
required to establish link when rates are 1 G and 10 G. Copper ports support
autonegotiation; whereas fiber ports do not support autonegotiation.
NOTE: The 1 G fiber port configuration is supported starting with Junos
OS Release 10.2R2.
The 10 G fiber port does not support autonegotiation.
•
When the interface is configured as a fiber port, typical configurations similar to the
1 Gbps fiber (SFP) ports in the 24-Port Gigabit Ethernet XPIM are supported. See
“24-Port Gigabit Ethernet XPIM Overview” on page 109 for more details.
•
Diagnostics for debugging and problem isolation.
•
Operates in routed mode.
•
SNMP support.
•
J-Web support.
Related
Documentation
2-Port 10-Gigabit Ethernet XPIM Overview on page 83•
• 2-Port 10-Gigabit Ethernet XPIM Hardware Specifications on page 88
• 2-Port 10-Gigabit Ethernet XPIM LEDs on page 89
• 2-Port 10-Gigabit Ethernet XPIM Components on page 84
• 2-Port 10-Gigabit Ethernet XPIM Basic Configuration on page 223
87Copyright © 2015, Juniper Networks, Inc.
Chapter 12: 2-Port 10-Gigabit Ethernet XPIM
To Next Page
Loading...
Need help?
General
