Table 52: 8-Port Gigabit Ethernet SFP XPIM Supported
Modules (continued)
Cable
Connector Type (SFP
Transceiver)Juniper Product Number
LC1000BASE-BX10, at 10km
(TX1310nm / RX1490nm)
EX-SFP-GE10KT13R14
LC1000BASE-BX10, at 10km
(TX1310nm / RX1550nm)
EX-SFP-GE10KT13R15
LC1000BASE-BX10, at 10km
(TX1490nm / RX1310nm)
EX-SFP-GE10KT14R13
LC1000BASE-BX10, at 10km
(TX1550nm / RX1310nm)
EX-SFP-GE10KT15R13
LC100Base-BX Fast Ethernet Optics,
at 20km (TX 1310nm / RX
1550nm)
EX-SFP-FE20KT13R15
LC100Base-BX Fast Ethernet Optics,
at 20km (TX 1550nm / RX
1310nm)
EX-SFP-FE20KT15R13
LC1000BASE-BX, at 40km
(TX1310nm / 1550nm)
EX-SFP-GE40KT13R15
LC1000BASE-BX, at 40km
(TX1550nm / RX1310nm)
EX-SFP-GE40KT15R13
CAUTION: If you are having a problem running a Juniper Networks device
that is using a third-party optic or cable, the Juniper Networks Technical
Assistance Center (JTAC) can help you diagnose the source of the problem.
Your JTAC engineer might recommend that you check the third-party optic
or cable and potentially replace it with an equivalent Juniper Networks optic
or cable that is qualified for the device.
Related
Documentation
• 8-Port Gigabit Ethernet SFP XPIM Overview on page 91
• 8-Port Gigabit Ethernet SFP XPIM Hardware Specifications on page 93
• 8-Port Gigabit Ethernet SFP XPIM Network Interface Specifications on page 25
• 8-Port Gigabit Ethernet SFP XPIM Key Features on page 93
• 8-Port Gigabit Ethernet SFP XPIM LEDs on page 94
• 8-Port Gigabit Ethernet SFP XPIM Components on page 92
• 8-Port Gigabit Ethernet SFP XPIM Basic Configuration on page 227
Copyright © 2015, Juniper Networks, Inc.96
SRX Series Services Gateways for the Branch Physical Interface Modules Reference