Juniper SRX Series - Page 191

Table 92: EIA-449 DCE Cable Pinouts for the 8-Port Serial
GPIM (continued)
DescriptionPairingPair
Dir
Output
(O)
and
Input
(I)
DB-37 (2)
Pin
DB-37 (1)
Pin
VHDCI-68
Pin
Terminal
Ready (B)
T67Pair 7O29T65
Data Mode
(B)
T63Pair 8I30T61
Receiver
Ready (B)
T64Pair 9O31T62
Receive
Timing (B)
T56Pair 10I35T54
Shield
Ground
37T27
Protocol
Identifier_1
T29 to T27
Related
Documentation
EIA-449 DTE Cable Pinouts for 8-Port Serial Gigabit-Backplane Physical Interface
Module on page 168
•
• EIA-530 DTE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface
Module on page 175
• EIA-530 DCE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface
Module on page 171
• EIA-530A DTE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface
Module on page 183
• EIA-530A DCE Cable Pinouts for 8-Port Serial Gigabit-Backplane Physical Interface
Module on page 179
• RS-232 DTE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface
Module on page 188
• RS-232 DCE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface
Module on page 186
• V.35 DTE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface
Module on page 194
• V.35 DCE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface
Module on page 190
167Copyright © 2015, Juniper Networks, Inc.
Chapter 24: Serial Gigabit-Backplane Physical Interface Module Cable Specifications