Hardware inventory:
Item Version Part number Serial number Description
Chassis AG1111AA7925 SRX240h
Routing Engine REV 01 750-021793 PW7925 RE-SRX240H
da0 999 MB ST72682 Nand Flash
usb0 (addr 1) DWC OTG root hub 0 vendor 0x0000 uhub0
usb0 (addr 2) product 0x6254 25172 vendor 0x058f uhub1
usb0 (addr 3) ST72682 High Speed Mode 64218 STMicroelectronics umass0
FPC 0 FPC
PIC 0 16x GE Base PIC
FPC 1 750-029145 112009000278 FPC
PIC 0 1x GE SFP mPIM
FPC 2 REV 00 750-032730 AABC5081 FPC
PIC 0 1x GE High-Perf SFP
mPIM
Xcvr 0 REV 02 740-013111 9101465 SFP-T
FPC 3 750-029145 062009000057 FPC
PIC 0 1x GE SFP mPIM
FPC 4 750-029145 122009000061 FPC
PIC 0 1x GE SFP mPIM
Xcvr 0 REV 01 740-011782 PBL0C3T SFP-SX
Power Supply 0
NOTE: In the example shown above, the output for the 1-PortSFP Mini-PIM
appears as 1X GE SFP mPIM, and the output for the 1-Port Gigabit Ethernet
SFP Mini-PIM appears as 1X GE High-Perf SFP mPIM.
•
Verify the status of the interface:
show interfaces terse
•
Assign the port an IP address, for example:
set interfaces ge-1/0/0 unit 0 family inet address interface address/destination prefix
•
Add or select a security zone; for example, Trust:
set security zones security-zone trust interfaces ge-1/0/0.0 host-inbound-traffic
system-services telnet
•
Add or select security zones for host inbound traffic protocol options, for example :
set security zones security-zone trust interfaces ge-1/0/0.0 host-inbound-traffic protocols
ospf
•
Set security policies:
set security policies from-zone trust to-zone trust
Related
Documentation
1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Overview on page 33•
• 1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Hardware Specifications
on page 35
• 1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Network Interface
Specifications on page 19
207Copyright © 2015, Juniper Networks, Inc.
Chapter 25: Configuring Mini-Physical Interface Modules
To Next Page
Loading...
Need help?
General
