•
Set operating mode, for example, copper:
set interfaces xe-6/0/0 media-type copper
NOTE: Autonegotiation is not supported when the 2-Port 10-Gigabit
Ethernet XPIM is operating in fiber mode at a link speed of 10 Gbps.
•
Set interface speed, for example, 10 G:
set interfaces xe-6/0/0 speed 10g
NOTE: For copper ports, all 10 Mbps, 100 Mbps, 1 G, and 10 G speeds are
supported; for fiber ports, only 1 G and 10 G speeds are supported.
Related
Documentation
2-Port 10-Gigabit Ethernet XPIM Overview on page 83•
• 2-Port 10-Gigabit Ethernet XPIM Key Features on page 86
• 2-Port 10-Gigabit Ethernet XPIM Hardware Specifications on page 88
• 2-Port 10-Gigabit Ethernet XPIM LEDs on page 89
• 2-Port 10-Gigabit Ethernet XPIM Components on page 84
• Installing a Gigabit-Backplane Physical Interface Module on the SRX Series Services
Gateway on page 256
Copyright © 2015, Juniper Networks, Inc.226
SRX Series Services Gateways for the Branch Physical Interface Modules Reference
To Next Page
Loading...
Need help?
General
