Keba KeDrive D3-DU 3 A Series - Page 12

D3-DU 3xx/A, /BIntroduction
Project engineering manual V1.09
12
© KEBA 2021
Target group Prerequisite knowledge and abilities
Project engineer
Basic technical training (technical college, engineer training or
corresponding professional experience).
Knowledge about:
● current valid safety regulations,
● fundamental validation concepts according to EN ISO
13849,
● method of operation of a PLC,
● the application.
Electrician
Professional training in electrical engineering (based on indus-
try- standard training guidelines).
Knowledge about:
● current valid safety regulations,
● wiring guidelines,
● circuit diagrams,
● professional installation of electrical connections according
to national and international regulations.
Programmer
Basic technical training (technical college, engineer training or
corresponding professional experience).
Knowledge about:
● current valid safety regulations,
● method of operation of a PLC,
● programming of an safety PLC.
Start-up operator
Basic technical training (technical college, engineer training or
corresponding professional experience).
Knowledge about:
● current valid safety regulations,
● fundamental validation concepts according to EN ISO
13849,
● the method of operation of the machine or system,
● fundamental functions of the application, system analysis
and troubleshooting,
● setting options on the operating devices.
Service technician
Basic technical training (technical college, engineer training or
corresponding professional experience).
Knowledge about:
● Method of operation of a PLC,
● current valid safety regulations,
● fundamental validation concepts according to EN ISO
13849,
● method of operation of the machine or system,
● diagnostic options,
● systematic fault analysis and remedial action.