D3-DU 3xx/A, /B Introduction
Project engineering manual V1.09
15
© KEBA 2021
The term "safe" used in the following text in any case refers to the functional
safety classification for applications up to PL acc. to EN ISO 13849-1 or SIL
acc. to EN 62061 and EN 61508. The signal level "Low" is defined as a safe
condition.
The term "not safe" refers to functions and data interfaces which do not meet
requirements of the above named standards completely or partially.
In case of ambiguity or further required information, please contact KEBA.
1.4.1 Contents of the document
● Description of the module
● Mounting and installation instructions
● Description of interfaces including EMC guidelines
● Configuration
● Operating behavior
● Diagnostics functions
● Maintenance
● Technical data
Information
Chapters and paragraphs which apply exclusively for control module vari-
ants with safety function, are separately highlighted with "only for D3-DU
3x5/x".
1.4.2 Not contained in this document
● Programming instruction
● Application description and application diagnosis
● Firmware description
● General functional safety information
● Examples for safety applications
1.5 Documentation for further reading
The following documents are to be observed:
Doc.No. Name Target group
System manual
● Project engineer
● Electrician
● Programmer
● Commissioning foreman
● Service technician
To Next Page
Loading...
