D3-DU 3xx/A, /B Directives, standards and regulations
Project engineering manual V1.09
121
© KEBA 2021
Check of the conformity with the RoHS Directive
EN IEC 63000:2018
Technical documentation for the assessment
of electrical and electronic products with re-
spect to the restriction of hazardous sub-
stances
Check of the conformity with the Machinery Directive
The following functional safety standards are applicable to the D3-DU 3x5/x:
Functional safety
EN ISO 13849-1:2015
Safety of machinery - Safety-related parts of control
systems - Part 1: General principles for design
EN 62061:2005
Safety of machinery - Functional safety of safety-re-
lated electrical, electronic and programmable elec-
tronic control systems
EN 61800-5-2:2017
Adjustable speed electrical power drive systems - Part
5-2: Safety requirements - Functional
EN 61508-x:2010
Functional safety of electrical/electronic/programmable
electronic safety-related systems
13.3 Other standards
In addition, the following legally non-binding European standards were con-
sulted in partial aspects during the development of the safety concept.
Environmental conditions
EN 61131-2:2007
Programmable controllers - Part 2: Equipment require-
ments and tests
EN 61800-5-1:2007
Adjustable speed electrical power drive systems - Part
5-1: Safety requirements - Electrical, thermal and en-
ergy
Electrical safety and fire protection
EN 61131-2:2007
Programmable controllers - Part 2: Equipment require-
ments and tests
EN 61800-5-1:2007
Adjustable speed electrical power drive systems - Part
5-1: Safety requirements - Electrical, thermal and en-
ergy
13.4 Regulations
Regulation (EG) No. 1907/2006 REACH EU chemicals regulation
To Next Page
Loading...
Need help?
General
