Keba KeDrive D3-DU 3 A Series - Page 72

D3-DU 3xx/A, /BOperating behavior
Project engineering manual V1.09
72
© KEBA 2021
● Control menu
● Menus of the drives (1...n)
● Menu for simultaneous operation of several drives
The following tables describe the menu structure in more detail.
Information
The displayed menu structure shows the full expansion of the menu. The
display of the menu may differ depending on the product variant.
Main menu
Status display Top menu level Description
<CPU-STATUS>
Menu-CP
<State>
Control menu
Menu-Drv<n>
<State>
Drive menu <n>
Menu-Drives
Menu for simultaneous oper-
ation of multiple drives
Control menu (Menu-CP)
The following table describes the menu below Menu-CP.
Information
The table describes the complete structure of the menu of a control. De-
pending on how many interfaces the control is equipped with, individual
menu items may or may not be available.
1. Level 2. Level 3. Level 4. Level Description
CP Menu
C-1 State
C-1 State
<State>
Status of the control
CP Menu
C-2 System
C-2 System
Start
Appl.
Start
Appl.
executed
Starting the application
Only available if the application has
been stopped.
C-2 System
Stop Appl.
Stop Appl.
executed
Stopping the application
Only available if the application has
been started.
C-2 System
Restart
Appl.
Restart
Appl.
executed
Restarting the application
C-2 System
Start CP
Start CP
executed
Starting the control process
Only available if the control process
has been stopped.
C-2 System
Stop CP
Stop CP
executed
Stopping the control process
Only available when the control has
been started.