Keba KeDrive D3-DU 3 A Series - Page 81

D3-DU 3xx/A, /B Operating behavior
Project engineering manual V1.09
81
© KEBA 2021
1. Level 2. Level 3. Level 4. Level Description
Drive<n>
Menu
D<n>-4
Service
D<n>-4
Service
Error Axis
<n>
Error Axis
<n>
<Error
code<n>>
Error <n> Axis <n>
The error is acknowledged with EN-
TER and appears on the display:
<Error code<n>>
executed
D<n>-4
Service
Error His-
tory
Error
<Gerät>
<Error
code<n>>
Error occurred <n>
D<n>-4
Service
Backup
ParamSet
Backup
ParamSet
<Location>
Performing a backup of the param-
eter sets and saving them under
the specified location
EoE must be enabled for this com-
mand.
Locations:
● local: on CFast card of the
control under root/appld-
isk/application/
drive/drive
● /media/usb<x>/drive:
on USB stick (x: number of the
USB port of the control)
Select
ParamSet
<Filename>
File selection
The following file names are valid,
where <n> is the index, <ip> is the
EoE IP address and <alias> is the
configured device name of the
drive:
● DriveParam-
Set_<ip>_<alias>.csv
(Standardwert)
● DriveParam-
Set_<n>.csv
● DriveParam-
Set_<n>[..].csv
● DriveParam-
Set_<ip>.csv
● DriveParam-
Set_[..]_<alias>.csv
● DriveParam-
Set_<ip>_[..].csv
● DriveDiff-
Set_<ip>.csv
Backup
ParamSet
Are you
sure?
Confirm execution