D3-DU 3xx/A, /B Diagnosis
Project engineering manual V1.09
95
© KEBA 2021
To exit the error state, the control process has to be stopped and the appli-
cation must be deleted. The entry <CPU-STATUS> Menu-CP C-2 System
Stop CP first must be selected in the display menu and then C-2 System
Delete Appl. has to be executed. Thus, no application is on the control any
more and the control process can be started again via the display menu with
the entry C-2 System Start CP. A new application can now be loaded onto
the control
To Next Page
Loading...
