Keysight Technologies B2961A User Manual

4-12 Keysight B2961A/B2962A User’s Guide, Edition 3
Front Panel Reference
Display and Assist Keys
VOLTS (V) sets the voltage measurement.
OHMS (R) sets the resistance measurement.
WATTS (P) sets the power measurement.
%LIMIT (%) sets the percent-to-Limit measurement.
Resistance data is given by Resistance=Vmeas/Imeas.
Power data is given by Power=VmeasImeas.
In the above formula, Vmeas is the voltage measurement data,
and Imeas is the current measurement data.
For details on using resistance compensation, see “Resistance
Compensation” on page 6-18.
More... Changes the assist keys to Assist keys 2.
Assist keys 2 Show Preview Changes display from channel setup to waveform preview.
Hide Preview Changes display from waveform preview to channel setup.
Show Options Displays the optional parameters shown in “Optional
Parameters” on page 4-18, and changes the softkey label to
Hide Options.
Hide Options Displays the function setup parameters shown in “Function
Parameters” on page 4-13, and changes the softkey label to
Show Options.
Show Pulse Displays the pulse setup parameters shown in “Pulse
Parameters” on page 4-19, and changes the softkey label to
Hide Pulse.
Hide Pulse Displays the function setup parameters shown in “Function
Parameters” on page 4-13, and changes the softkey label to
Show Pulse.
Show Trigger Displays the trigger setup parameters shown in “Trigger
Parameters” on page 4-20, and changes the softkey label to
Hide Trigger.
Hide Trigger Displays the function setup parameters shown in “Function
Parameters” on page 4-13, and changes the softkey label to
Show Trigger.
More... Changes the assist keys to Assist keys 1.
Softkey labels Show XXXX and Hide XXXX are switched by pressing the key.

Keysight Technologies B2961A Specifications

General

Brand	Keysight Technologies
Model	B2961A
Category	Portable Generator
Language	English