To Next Page

To Previous Page

Keysight B2961A/B2962A User’s Guide, Edition 3 6-35

Function Details

Initial Settings

Table 6-7 Channel Initial Settings

Program variables None Not changed

Program selection None 

Program status Idle 

Setup item Power on Reset

Low terminal state GROUNDED Not changed

Output state OFF 

Output auto filter enable ON 

Output filter enable ON 

Output filter time constant 5 s 

Output filter frequency 31.8309886 kHz 

Output OFF state NORMAL 

Output protection OFF 

Programmable output resistance current list -1E-4,1E-4 

Programmable output resistance fixed level 0 

Programmable output resistance mode Constant 

Programmable output resistance state OFF 

Programmable output resistance voltage list 0.0,0.0 

Programmable output resistance (series resistance) 0 

Programmable output resistance (shunt resistance) 2 G

Programmable output resistance mode list VOLTS 

External output filter state OFF Not changed

External output filter type ULNF Not changed

Setup item Power on Reset

Keysight Technologies B2961A User Manual

Other manuals for Keysight Technologies B2961A