Keysight E6680A - Page 1050

9 Programming the Instrument
9.1 List of Supported SCPI Commands
H
HCOPy:ABORt
HCOPy[:IMMediate]
I
INITiate:<measurement>
INITiate:CONTinuous
INITiate:FCAPture
INITiate[:IMMediate]
INITiate:PAUSe
INITiate:RESTart
INITiate:RESume
INITiate:SPECtrum
INITiate:STReaming
INITiate:WAVeform
INPut[1]:IQ[:I]:IMPedance
INPut[1]:IQ:Q:IMPedance
INPut:COUPling
INPut:COUPling:I
INPut:COUPling:Q
INPut:FEXTender:CABLe:CORRection
INPut:IMPedance:REFerence
INPut:IQ[:I]:DIFFerential
INPut:IQ:MIRRored
INPut:IQ:Q:DIFFerential
INPut:OFFSet:I
INPut:OFFSet:Q
INSTrument:CATalog?
INSTrument:CONFigure:<mode_id>:<meas>
INSTrument:COUPle:SCReen:INPut
INSTrument:DEFault
INSTrument:NSELect
INSTrument:SCReen:CATalog?
INSTrument:SCReen:CREate
INSTrument:SCReen:DELete
INSTrument:SCReen:DELete:ALL
INSTrument:SCReen:MULTiple?
INSTrument:SCReen:MULTiple[:STATe]
INSTrument:SCReen:ORIentation
INSTrument:SCReen:REName
INSTrument:SCReen:SELect
INSTrument:SCReen:STAB?
INSTrument[:SELect]
INSTrument[:SELect]
INSTrument[:SELect]
IQ Analyzer Mode User's &Programmer's Reference 1050