3 IQ Analyzer (Basic) Mode
3.3 Streaming Measurement
-221,"Settings conflict; Cannot change value while Streaming is in progress"
Dependencies If Streaming Duration Type is set to INFinite, this key is grayed-out
If a SCPI query is sent while Streaming Duration Type is set to INFinite, the return value is 9.9E+37
If you try to change Streaming Duration while Streaming Duration Type is set to INFinite, it
generates the error message:
-221,"Settings conflict; Streaming Type needs to be set to Finite to enable this parameter"
Preset 0
State Saved Yes
Min 1 us
Max 9.9E+37
Streaming Duration Type (Auto Function)
Remote
Command
[:SENSe]:STReaming:ACQuisition:DURation:TYPE INFinite | FINite
[:SENSe]:STReaming:ACQuisition:DURation:TYPE?
Example
:STR:ACQ:DUR:TYPE FIN
:STR:ACQ:DUR:TYPE?
Preset
INFinite
State Saved Yes
Range
INFinite|FINite
Start Streaming
Remote Command
[:SENSe]:STReaming:ACQuisition:STARt
Example
:STR:ACQ:STAR
Dependencies Disabled (grayed-out) when there is an active streaming session in process. If you send this SCPI
command while streaming is in progress, it generates the error message:
-221,"Settings conflict; Streaming in progress. Stop streaming first to restart"
Stop Streaming
Remote Command
[:SENSe]:STReaming:ACQuisition:STOP
Example
:STR:ACQ:STOP
Dependencies Disabled (grayed-out) when there is no active streaming session in process. If you send this SCPI
command when there is no active streaming session in progress, it generates the error message:
-221,"Settings conflict; Streaming has not started"
417 IQ Analyzer Mode User's &Programmer's Reference
To Next Page
Loading...
