3 IQ Analyzer (Basic) Mode
3.3 Streaming Measurement
Streaming Status (Remote Queries Only)
The queries described in this section can be used to determine the status of an in-
progress streaming session. The values are read-only, and are estimates for the
streaming session in progress.
Streaming Status
Shows the status of streaming. Returns 1 if streaming is in progress, or 0 if not in
progress.
The value returned corresponds to the Streaming annotation at the upper left
portion of the instrument screen.
Remote
Command
[:SENSe]:STReaming:ACQuisition:STATe?
Example
:STR:ACQ:STAT?
Elapsed Time
Returns the time elapsed from when the streaming started.
Remote Command
[:SENSe]:STReaming:ACQuisition:DURation:ELAPsed?
Example
:STR:ACQ:DUR:ELAP?
Dependencies Returns zero when there is no active streaming session in process
Resets to zero when either "Streaming Duration" on page 416 or Streaming Duration Type is changed
Remaining Time
Returns the remaining time until the streaming completes.
Remote Command
[:SENSe]:STReaming:ACQuisition:DURation:REMaining?
Example
:STR:ACQ:DUR:REM?
Dependencies If "Streaming Duration" on page 416 Type is set to INFinite, returns the value 9.9E+37
If Streaming Duration Type is set to FINite, it is equal to the Streaming Duration at the start of
streaming session
It is zero at the end of a streaming session
IQ Analyzer Mode User's &Programmer's Reference 418
To Next Page
Loading...
