Keysight E6680A - Filter Alpha

3 IQ Analyzer (Basic) Mode
3.1 Complex Spectrum Measurement
Backwards
Compatibility SCPI
Not supported in STReaming measurement
[:SENSe]:SPECtrum:WBIF:FILTer:BANDwidth|BWIDth
Auto Function
Remote
Command
Complex Spectrum:
[:SENSe]:SPECtrum:DIF:FILTer:BANDwidth:AUTO ON | OFF | 1 | 0
[:SENSe]:SPECtrum:DIF:FILTer:BANDwidth:AUTO?
Streaming:
[:SENSe]:STReaming:DIF:FILTer:BANDwidth:AUTO ON | OFF | 1 | 0
[:SENSe]:STReaming:DIF:FILTer:BANDwidth:AUTO?
Example
:SPEC:DIF:FILT:BAND:AUTO 0
:SPEC:DIF:FILT:BAND:AUTO?
Preset
ON
State Saved Saved in instrument state
Range Auto | Man
Filter Alpha
Lets you set the filter alpha for the DIF filter. This feature is only available when
Option DP2, B40, or wider IF Bandwidth option is installed.
Remote Command Complex Spectrum:
[:SENSe]:SPECtrum:DIF:FILTer:ALPHa <real>
[:SENSe]:SPECtrum:DIF:FILTer:ALPHa?
Streaming:
[:SENSe]:STReaming:DIF:FILTer:ALPHa <real>
[:SENSe]:STReaming:DIF:FILTer:ALPHa?
Example
:SPEC:DIF:FILT:ALPH 0.5
:SPEC:DIF:FILT:ALPH?
Dependencies Only available when Option DP2, B40, or wider IF Bandwidth option is installed. Disabled when "Filter
Type" on page 237 is FLATtop
Preset 0.2
State Saved Yes
Min 0.01
Max 1.00
Backwards
Compatibility SCPI
Not supported in STReaming measurement
[:SENSe]:SPECtrum:WBIF:FILTer:ALPHa
239 IQ Analyzer Mode User's &Programmer's Reference