Keysight E6680A - Mass Storage Device Copy (Remote Command Only); Mass Storage Delete (Remote Command Only); Mass Storage Data (Remote Command Only)

7 Save/Recall/Print
7.3 Save
parameter specifies the source, and the second parameter specifies the destination
The second form has four parameters. In this form, the first and third parameters specify the source.
The second and fourth parameters specify the directories. The first pair of parameters specifies the
source. The second pair specifies the destination. An error is generated if the source doesn’t exist or
the destination file already exists
This command will generate an “access denied” error if the destination is a restricted folder (for
example, C:\Windows) and you do not have Power User or Administrator privileges
7.3.13.4 Mass Storage Device Copy (Remote Command Only)
Transfers data to/from a file and a peripheral device.
Remote
Command
:MMEMory:COPY:DEVice <source_string>,<dest_string>
<source_string> and <dest_string> must be valid logical paths
Notes The strings must be a valid logical path or a valid device keyword. If dest_string is a device
keyword, the data is copied from the source file to the device. If source_string is a device keyword,
the data is copied to the source file from the device
Valid device keywords are:
SNS (smart noise source)
An error is generated if the file or device is not found
7.3.13.5 Mass Storage Delete (Remote Command Only)
Remote
Command
:MMEMory:DELete <file_name>[,<directory_name>]
<file_name> and <directory_name> must be valid logical paths
Example
:MMEM:DEL "Screen_0000.png"
Notes If no directory is specified, uses the current directory
Removes a file from the specified directory. <file_name> specifies the file name to be removed. This
command generates an “access denied” error if the file is in a restricted folder (for example,
C:\Windows) and you do not have Power User or Administrator privileges
7.3.13.6 Mass Storage Data (Remote Command Only)
Creates a file containing the specified data or queries the data from an existing file.
Remote
Command
:MMEMory:DATA <file_name>, <data>
<file_name> must be a valid logical path
:MMEMory:DATA? <file_name>
Example
:MMEM:DATA? "MyFile.txt"
Notes If no directory is specified, uses the current directory
965 IQ Analyzer Mode User's &Programmer's Reference