Table Of Contents
IQ Analyzer ModeUser's &Programmer's Reference 1
Table Of Contents 3
1 Documentation Roadmap 43
1.1 Products Covered by this Document 44
1.2 Additional Documentation 45
2 User Interface 47
2.1 Screen Tabs 48
2.1.1 Mode/Meas/View Dialog 49
2.1.1.1 Mode 50
2.1.1.2 Application Mode Remote Commands 53
Application Mode Catalog Query (Remote Command Only) 53
Current Application Model (Remote Command Only) 54
Current Application Revision (Remote Command Only) 54
Current Application Options (Remote Command Only) 55
Application Catalog Number of Entries (Remote Command Only) 55
Application Catalog Model Numbers (Remote Command Only) 55
Application Catalog Revision (Remote Command Only) 56
Application Catalog Options (Remote Command Only) 56
ESA SA compatibility command (Remote Command only) 56
GSM Mode compatibility command (Remote Command only) 57
SA compatibility command for EMC (Remote Command only) 57
Receiver compatibility command for EMC (Remote Command only) 57
APD compatibility command for EMC(Remote Command only) 57
IF Mode compatibility command for EMC (Remote Command only) 58
2.1.1.3 Measurement 58
2.1.1.4 View 58
2.1.1.5 Sequencer 60
2.1.1.6 Screen Name 63
2.1.1.7 Delete This Screen 64
2.1.1.8 Delete All But This Screen 64
2.1.1.9 89600 VSA 65
2.1.2 Add Screen 66
2.2 Meas Bar 68
2.3 Measurement Display 72
X-Series Signal Analyzers
IQ Analyzer Mode User's &Programmer's Reference
3
To Next Page
Loading...
