Keysight E6680A - Mixing Mode State (Remote Command Only)

3 IQ Analyzer (Basic) Mode
3.1 Complex Spectrum Measurement
Remote Command For valid <meas> values, see "Valid Measurement Keywords" on page 266
[:SENSe]:<meas>:POWer:IQ:REFerence:PLANe RF | BASeband
[:SENSe]:<meas>:POWer:IQ:REFerence:PLANe?
Example (Complex Spectrum measurement)
SPEC:POW:IQ:REF:PLAN BAS
SPEC:POW:IQ:REF:PLAN?
Dependencies Only available if the I/Q input exists
Enabled only when the input is I/Q and I/Q Path is I+jQ
Disabled for all other conditions
Preset
RF
State Saved Saved in instrument state
Valid Measurement Keywords
This function is available only in certain Modes and measurements. Only the
following listed values of <meas> are valid.
Mode(s) Meas
<meas>
BASIC
Complex Spectrum
SPECtrum
BASIC
CQM
EDGEGSM
LTEAFDD
LTEATDD
MSR
NR5G
PNOISE
SRCOMMS
VMA
WCDMA
WLAN
IQ Waveform
WAVeform
WLAN
Modulation Analysis
EVM
WLAN
MIMO Modulation Analysis
EVMMimo
Mixing Mode State (Remote Command Only)
Available only in the Complex Spectrum, Streaming, and Waveform measurements.
IQ Analyzer Mode User's &Programmer's Reference 266