Keysight E6680A - User Preset All Modes

5 Preset
5.8 User Preset All Modes
5.8 User Preset All Modes
Recalls all the User Preset files for each Mode, switches to the Power-on Mode, and
activates the saved measurement from the Power-on Mode User Preset file.
User Preset All Modes can be executed from the "Preset Dropdown" on page 588
See also "User Preset" on page 594.
Remote
Command
:SYSTem:PRESet:USER:ALL
Example
:SYST:PRES:USER:SAVE
:SYST:PRES:USER:ALL
Notes :SYST:PRES:USER:SAVE is used to save the current state as the user preset state
Status Bits/OPC
dependencies
Clears all pending OPC bits. The Status Byte is set to 0
IQ Analyzer Mode User's &Programmer's Reference 597