Keysight E6680A - Meas Setup; Settings; Avg | Hold Number

3 IQ Analyzer (Basic) Mode
3.1 Complex Spectrum Measurement
3.1.8 Meas Setup
Contains functions for setting up the measurement parameters and for setting up
parameters global to all measurements in the Mode.
3.1.8.1 Settings
Contains frequently used Meas Setup functions to which you will want the fastest
access.
Avg | Hold Number
Lets you set the number of ‘sweeps’ that are averaged. After the specified number of
‘sweeps’ (average counts), the averaging mode (terminal control) setting determines
the averaging action.
Remote
Command
Complex Spectrum:
[:SENSe]:SPECtrum:AVERage:COUNt <integer>
[:SENSe]:SPECtrum:AVERage:COUNt?
Streaming:
[:SENSe]:STReaming:AVERage:COUNt <integer>
[:SENSe]:STReaming:AVERage:COUNt?
Example
:SPEC:AVER:COUN 10
:SPEC:AVER:COUN?
Preset 25
State Saved Yes
Min 1
Max 20001
Annotation The average count is displayed in the measurement bar on the front panel display. The annotation
appears in the format n/N where n is the current average and N is the average count
Auto Function
Remote Command Complex Spectrum:
[:SENSe]:SPECtrum:AVERage[:STATe] ON | OFF | 1 | 0
[:SENSe]:SPECtrum:AVERage[:STATe]?
Streaming:
[:SENSe]:STReaming:AVERage[:STATe] ON | OFF | 1 | 0
[:SENSe]:STReaming:AVERage[:STATe]?
227 IQ Analyzer Mode User's &Programmer's Reference