Keysight E6680A - Time Avg Num

3 IQ Analyzer (Basic) Mode
3.1 Complex Spectrum Measurement
Option Parameter Behavior
Voltage Avg
SCALar
The voltage is averaged
Maximum
MAXimum
The maximum values are retained
Minimum
MINimum
The minimum values are retained
Remote
Command
Complex Spectrum:
[:SENSe]:SPECtrum:AVERage:TYPE RMS | LOG | SCALar | MAXimum | MINimum
[:SENSe]:SPECtrum:AVERage:TYPE?
Streaming:
[:SENSe]:STReaming:AVERage:TYPE RMS | LOG | SCALar | MAXimum | MINimum
[:SENSe]:STReaming:AVERage:TYPE?
Example
:SPEC:AVER:TYPE RMS
:SPEC:AVER:TYPE?
Preset
LOG
State Saved Saved in Instrument State
Range
RMS|LOG|SCALar|MAXimum|MINimum
Auto Function
Remote
Command
Complex Spectrum:
[:SENSe]:SPECtrum:AVERage:TYPE:AUTO[:STATe] ON | OFF | 1 | 0
[:SENSe]:SPECtrum:AVERage:TYPE:AUTO[:STATe]?
Streaming:
[:SENSe]:STReaming:AVERage:TYPE:AUTO[:STATe] ON | OFF | 1 | 0
[:SENSe]:STReaming:AVERage:TYPE:AUTO[:STATe]?
Example
:SPEC:AVER:TYPE:AUTO 0
:SPEC:AVER:TYPE:AUTO?
Couplings Auto selects Power (RMS) averaging if a "Marker Function" on page 223 (Marker Noise, Band/Intvl
Power) is ON
Preset
ON
State Saved Saved in Instrument State
Range Auto|Man
Time Avg Num
Sets the number of HW averages to be executed per each data acquisition.
NOTE
This control is not available in the Streaming measurement.
229 IQ Analyzer Mode User's &Programmer's Reference