Keysight E6680A - IQ Data (Normal); IQ Data (Number of Intervals); Complex Spectrum Meas Results File Contents

7 Save/Recall/Print
7.3 Save
7.65E-07 7.796300857 -95.8662
-2.56E-06 -88.71658837 -97.78934
4.79E-07 -125.5631137 -101.0861
5.94E-06 -97.72218
4.71E-06 -96.72934
1.93E-06 -100.7464
4.04E-07 -99.8119
(rows continue until all data is displayed)
IQ Data (Normal)
Saves IQ data with the number of points defined by the formula below.
Remote Command
:MMEMory:STORe:WAVeform:IQData "File name"
:MMEMory:STORe:WAVeform:IQData[:NORMal] "File name"
Example Save IQ data from Waveform measurement into myResults.txt in the
BASIC/data/WAV/results directory on the data drive:
:MMEM:STOR:WAV:IQD "myResults.txt"
Dependencies Only available in IQ Analyzer (BASIC) Mode
IQ Data (Number of Intervals)
Saves IQ data with the number of points defined by the formula below.
Remote
Command
:MMEMory:STORe:WAVeform:IQData:INTerval "File name"
Example Save IQ data from Waveform measurement into myResults.txt in the
BASIC/data/WAV/results directory on the data drive:
:MMEM:STOR:WAV:IQD:INT "myResults.txt"
Complex Spectrum Meas Results File Contents
Contains measurement results for Complex Spectrum. The file is in Comma-
Separated Value (CSV) format, with a .csv extension.
The file starts with a Header Block of 7 rows as described below.
Header Block
947 IQ Analyzer Mode User's &Programmer's Reference