Keysight E6680A - Page 946

7 Save/Recall/Print
7.3 Save
–
Firmware rev and model number
–
Option string
–
Center Frequency
–
Input Port
–
Info BW
–
Capture Time
The data above is followed in the file by a line containing MeasResult0,
MeasResult1, and MeasResult2. This line forms a header for each set of
measurement results, which appear in subsequent lines. Each line of Measurement
Results consists of 3 comma-separated values.
The MeasResult0 set in the file corresponds to the data returned by
MEAS|READ|FETCh:WAVeform0; the MeasResult1 set corresponds to the data
returned by :MEAS|READ|FETCh WAVeform1, and the MeasResult2 set
corresponds to the data returned by :MEAS|READ|FETCh WAVeform2. See
"Remote Command Results" on page 284 for details.
The exported file is in CSV format, with a .csv extension.
Meas Results File Example
When imported into Microsoft Excel or a similar spreadsheet application, a typical
Meas Results CSV file appears as shown in the example below.
MeasResult
WCDMA:WAV
A.20.10_P0003 N9040B
503 508 513 526 AKT ALV ATP B1A B1X B1Y B25 B2X
B40 B85 CR3 CRP DP2 EA3 EDC EDP EMC EP0 ERC
ESC ESP EXM FBP FP1 FP2 FS1 FS2 FSA FT2 LFE LNP
MPB NF2 NUL P26 PFR RBE RT2 RTL RTS TDS YAV
1
Center Frequency 1000000000
Input Port RF
WAV_InfoBw 100000
WAV_Used_CaptureTime 0.002
MeasResult0 MeasResult1 MeasResult2
3.24E-06 8.00E-06 -99.79862
7.28E-08 -96.51288923 -95.87017
2.43E-06 -96.51288923 -101.4529
-4.47E-06 251 -94.5003
IQ Analyzer Mode User's &Programmer's Reference 946