3 IQ Analyzer (Basic) Mode
3.2 IQ Waveform Measurement
Quick Save
When this control is pressed, the data currently in the HW memory is saved to the
file with the name that was specified last with the added file number.
For instance, if the latest recording file was saved with the file name MyData.binf,
then pressing Quick Save saves the data in HW memory with the file name MyData_
0000.binf.
All subsequent Quick Save presses generate a recording file with the file number
incremented.
In the example above, it will generate the files
“MyData_0000.binf”
“MyData_0001.binf”
“MyData_0002.binf”
and so on.
Not available in the STReaming measurement.
3.2.10 Trace
There are no Trace controls in this measurement.
411 IQ Analyzer Mode User's &Programmer's Reference
To Next Page
Loading...
