Keysight E6680A - Page 14

Table Of Contents
4.2.2.4 HiSLIP Server 438
4.2.2.5 Verbose SCPI On/Off 438
4.2.2.6 Device Clear on Disconnect 439
4.2.2.7 SCPI Socket Control Port (Remote Query Only) 440
4.2.2.8 SCPI Instrument Port (Remote Query Only) 440
4.2.3 Web Password Reset 440
4.2.4 System IDN Response 441
4.2.4.1 System IDN Response 441
4.2.4.2 User IDN 442
4.2.4.3 SYSTem:PERSona (Remote Commands Only) 443
SYSTem:PERSona:DEFault 443
SYSTem:PERSona:MANufacturer 444
SYSTem:PERSona:MANufacturer:DEFault 444
SYSTem:PERSona:MODel 444
SYSTem:PERSona:MODel:DEFault 445
4.2.5 LXI 445
4.2.5.1 LAN Reset 445
4.2.5.2 Device Identification (Remote Command Only) 445
4.2.6 Restore I/O Config Defaults 446
4.2.7 Query USB Connection (Remote Query Only) 446
4.2.8 USB Connection Status (Remote Query Only) 446
4.2.9 USB Packet Count (Remote Query Only) 447
4.2.10 Lock Remote I/O Session (Remote Command only) 447
4.2.10.1 Lock Remote I/O Request (Remote Query only) 449
4.2.10.2 Unlock Remote I/O Session (Remote Command only) 450
4.2.10.3 Remote I/O Session Lock Name (Remote Query only) 450
4.2.10.4 Remote I/O Session Lock Owner (Remote Query only) 451
4.2.11 Multiple Network Interface Card Configuration (Remote
Commands Only) 451
4.2.11.1 Multiple Network Adapters Enabled (Remote Query Only) 452
4.2.11.2 Config IPV4 Address (Remote Command Only) 452
4.2.11.3 Config IPV6 Address (Remote Command Only) 453
4.2.11.4 List All Physical Network Adapter IP Addresses (Remote Query
Only) 453
4.3 Preload / Unload Modes 454
14 IQ Analyzer Mode User's &Programmer's Reference