Table Of Contents
4.4.6 Configure Applications - Instrument boot-up 477
4.4.7 Configure Applications - Remote Commands 477
4.4.7.1 Configuration list (Remote Command Only) 478
4.4.7.2 Configuration Memory Available (Remote Query Only) 478
4.4.7.3 Configuration Memory Total (Remote Query Only) 478
4.4.7.4 Configuration Memory Used (Remote Query Only) 479
4.4.7.5 Configuration Application Memory (Remote Query Only) 479
4.5 Restore Defaults 480
4.5.1 Input/Output 480
4.5.2 I/O Config 481
4.5.3 User Interface 481
4.5.4 Power On 481
4.5.5 Alignments 482
4.5.6 Misc 482
4.5.7 All 483
4.6 Alignments 485
4.6.1 Auto Align 485
4.6.1.1 Auto Align 485
4.6.1.2 All but RF 488
4.6.1.3 Alert 488
4.6.2 Align Now 490
4.6.2.1 Align Now All 492
4.6.2.2 Align Now All but RF 494
4.6.2.3 Align Now RF 496
4.6.2.4 Align Now Expired 497
4.6.2.5 Align Now Preselector 498
4.6.2.6 Align Now All but RF Preselector 499
4.6.2.7 Align Now RF Presel Only (20 Hz to 3.6 GHz) 499
4.6.2.8 Align Now External Mixer 500
4.6.2.9 Align Source 501
4.6.2.10 Align Receiver 502
4.6.2.11 Align Fast 502
4.6.2.12 Align LO Leakage 503
16 IQ Analyzer Mode User's &Programmer's Reference
To Next Page
Loading...
