Table Of Contents
6.5.7.5 Correction Port 815
6.5.7.6 Direction 816
6.5.7.7 Description 817
6.5.7.8 Comment 817
6.5.7.9 File 818
6.5.7.10 Freq Interpolation (Remote Command Only) 818
6.5.7.11 Set Data (Remote Command Only) 819
6.5.8 Apply Corrections 819
6.5.9 Delete All Corrections 820
6.5.10 Correction Group On/Off 821
6.5.11 Break 821
6.5.12 Reload Corrections From Files 824
6.5.13 Edit Correction Group 824
6.5.13.1 Go to Row 824
6.5.13.2 Insert Row Below 824
6.5.13.3 Delete Row 825
6.5.13.4 Select File 825
6.5.13.5 Specify File 825
6.5.13.6 Remove File 825
6.5.13.7 Correction Trace Display 825
6.5.13.8 Description 826
6.5.13.9 Comment 826
6.5.13.10 Start Frequency 826
6.5.13.11 Stop Frequency 827
6.5.14 Merge Correction Data (Remote Command Only) 827
6.5.15 Set (Replace) Data (Remote Command Only) 828
6.5.16 Correction Group Range Data (Remote Command Only) 828
6.5.17 Delete Correction Group Range (Remote Command Only) 829
6.6 Freq Ref Input 830
6.6.1 Freq Ref Input 830
6.6.2 Ext Ref Freq 835
6.6.3 Default External Ref Freq 836
6.6.4 LO Ref Input 836
28 IQ Analyzer Mode User's &Programmer's Reference
To Next Page
Loading...
