Table Of Contents
6.9.1.32 Mech Atten Start 881
6.9.1.33 Mech Atten Stop 882
6.9.1.34 Mech Atten Step 883
6.9.1.35 Elec Atten Type 883
6.9.1.36 Elec Atten Start 883
6.9.1.37 Elec Atten Stop 884
6.9.1.38 Elec Atten Step 885
6.9.1.39 Full Range Atten Type 885
6.9.1.40 Full Range Atten Start 886
6.9.1.41 Full Range Atten Stop 886
6.9.1.42 Frequency Extender Attenuation Type 887
6.9.1.43 Frequency Extender Attenuation Start 888
6.9.1.44 Frequency Extender Attenuation Stop 888
6.9.1.45 Frequency Extender Atten Step 889
6.9.1.46 IF Path 889
6.9.1.47 IF Gain 890
6.9.1.48 Preamp 891
6.9.1.49 Low Noise Amplifier (LNA) 891
6.9.1.50 µW Path Control 892
6.9.1.51 Coupling 892
6.9.1.52 Phase Noise Optimization 893
6.9.1.53 Phase Noise Optimization All Option 898
6.9.1.54 Mixing Mode 899
6.9.1.55 Match State 899
6.9.2 Cal Group 900
6.9.3 Apply Cal Group 900
6.9.4 All Apply Cal Group Off 900
6.9.5 Connection 901
6.10 Calibrator Control 902
6.10.1 Select Cal Source 902
6.10.2 Cal Output 902
6.10.3 Cal Frequency 903
6.10.4 Cal Signal Type 903
IQ Analyzer Mode User's &Programmer's Reference 31
To Next Page
Loading...
